Anyone is capable of recovering hard drive data from a hard drive that has yet to fail out. It is not recommended unless you know what you are doing though as further damage could easily cause hard drive failure. If this occurs, the damage may be irreversible and you may not be able to recover any or all of the data on your hard drive. As a result, you should only go through the data recovery steps below if you are certain that your hard drive is still in working order or you are willing to take the risk of losing your data. According to http://www.securedatarecovery.
Step 1 – Choose a Hard Drive Data Recovery Software to Use
Data recovery software is made to make this process as simple and effective as possible. There are many programs available online for download for free or at a small cost. You should do some research and find the software that is compatible with your computer and that is reviewed the best by others that have used it for the same purpose. Hard Disk Data Recovery software may not be essential if you have an adapter that is able to complete the entire transfer process on its own. Of course, this adapter would only be necessary if the hard drive is no longer actively working and connected within a computer.
Step 2 – Purchase a Hard Drive Data Recovery Adapter
An adapter must be purchased in order to connect the hard drive to another computer and complete the transfer if the hard drive in question is no longer in a working computer. This adapter may range from $20 to $40 depending on where you are located and which store you go to. You may have to shop around to find the right adapter, but you will primarily be looking for one that is compatible with your hard drive. This will most likely be a SATA/PATA/IDE hard drive transfer adapter.
Step 3 – Completing the Transfer
You will have to determine where you want the files to go and which files you need to transfer. You will have the option of transferring everything at once as well. The specific options you have when attempting to transfer data out of the hard drive will depend on the software or adapter that is used. If you are using a program dedicated to this, then you will likely have a much better variety of options to choose from for Data Recovery purposes.
These three steps are all that you really need to do in order to recover data from a hard drive. In fact, it is technically two steps as you will likely just need to complete one of the first two. You will still have to assess the severity of your situation and determine if this is something you should attempt on your own. Ultimately, while doing it on your own may seem easier and cheaper, a hard drive data recovery service will be the safest route to go if you want to be certain that your data is properly recovered and transferred.